Single chip 1/3" format camera
310 TV line resolution
Built-in Audio
Composite NTSC video output
On-chip auto exposure
Automatic gain control
Auto white balance
Power Supply included
The V-X0097-SE is a CMOS color video camera in an enclosure with a built-in mic. The unit outputs· an NTSC composite video signal. Its spring-loaded, self-adjusting clamp makes it ideal for any quick installation applications. Its unique housing also allows the camera to be snapped out of its cradle and snapped back in any clock position. The universal swivel hinge allows the camera to be pointed toward any desired position. For wall mounting, use the three self-tapping screws (included) and fasten them through the three holes on the base of the unit (see below).
Unit comes complete with power supply and has a cable attached with RCA connectors for both Audio (white) and Video (yellow), and a female coaxial connector for Power (red). To operate the camera, simply connect the red power connector to the 9V power supply (included). Connect the yellow RCA plug to a VCR or Monitor video input. If audio is needed, connect the white RCA plug to any sound amplifier. The red LED will light up indicating that the camera is in operation.
|
SPECIFICATIONS
|
|
Imager
|
CMOS Sensor
|
|
Format
|
1/3"
|
|
Array Size
|
NTSC - 510 × 492
|
|
Resolution
|
310 TV Lines
|
|
Lens
|
4.3mm, f1.8
|
|
Scanning
|
2:1 Interlace
|
|
Video Output
|
2 Vp-p, 75 ohm
|
|
Auto Shutter
|
1/60 to 1/15,000 sec.
|
|
Gamma Correction
|
0.45 - on/off
|
|
S/N Ratio
|
>38dB
|
|
Minimum Illumination
|
10 lux
|
|
Supply Voltage
|
8-12 VDC
|
|
Power Requirements
|
30mA @ 12 VDC
|
|
Operating Temperature
|
-10°C to 55°C
|
|
Humidity Limits
|
0 - 95% Humidity
|
|
Sensor Package
|
48 Pin LCC
|
